咨询电话

13961710707


发扬工匠精神,全力打造优良品牌
 Carrying forward the spirit of craftsman and building a good brand

金宝提醒您餐巾纸压花机安装与操作的注意事项

发表时间:2020-10-12 16:28

一般人都不太清楚餐巾纸压花机安装与操作的注意事项,下面金宝就和大家一起深入分析下:


餐巾纸压花机的核心部件是压花辊,餐巾纸机就是专门生产我们平时经常使用的餐巾纸的纸品机械设备,餐巾纸生产厂家在购置一台餐巾纸机之后,一般都要进行餐巾纸机的安装,有的时候会有厂家派遣专业的技术人员去安装、调试新的餐巾纸机,在安装的过程中有几点是大家要注意的:


1、餐巾纸机器应放在平坦的水泥地上,机器的底座与地面之间用胶皮板或木板垫稳即可;


2、餐巾纸机器就位后需要对机器加接接地导线,以防机器漏电;


3、严格按照说明书上的要求进行安装调试。


另外,安装好了餐巾纸机之后,技术人员可以为员工讲解一下操作餐巾纸机的过程中应该注意哪些事项,这样才能保证生产安全,提高生产效率,主要的注意事项有以下几点:


1、工人操作时身体要与机器的传动部位、转动的辊子、带锯条保持一定的距离,防止轧棍及锯条伤手以确保安全;

2、生产过程中要保持各防护机罩安装完好,并且保持全自动压花餐巾纸机各传动或滑动部位的润滑;


3、生产过程中要保证各防护机罩的安装完好,如果有纸粘在压花辊或羊毛辊上时,对全自动压花餐巾纸机会造成损坏,有可能硌坏羊毛辊,要及时清理干净;


4、若用加热定形应在停机前1小时关闭加热电源,否则会烫坏羊毛辊。这些事项是大家一定要注意的,如果忽略这些问题,等事情真的发生的时候,就已经造成损失了,所以大家一定要严格按照安装和操作流程操作。



Most people don't know the installation and operation precautions of napkin paper embossing machine. Here's an in-depth analysis of Jinbao

The core component of napkin paper embossing machine is embossing roller. Napkin machine is a kind of paper product mechanical equipment specially used by us to produce napkin paper. After purchasing a napkin machine, napkin manufacturers usually install the napkin machine. Sometimes, the manufacturer will send professional technicians to install and debug new napkin machine We should pay attention to the following points:

1. The napkin machine should be placed on the flat cement floor, and the rubber board or wood board should be used to pad the base of the machine and the ground stably;

2. After the napkin machine is in place, it is necessary to add grounding wire to the machine to prevent leakage;

3. Install and debug in strict accordance with the requirements of the manual.

In addition, after installing the napkin machine, the technical personnel can explain to the staff what matters should be paid attention to in the process of operating the napkin machine, so as to ensure production safety and improve production efficiency. The main precautions are as follows:

1. Keep a safe distance between the saw blade and the saw blade and the hand during the operation;

2. During the production process, all protective covers should be installed in good condition, and all transmission or sliding parts of automatic embossing napkin machine should be lubricated;

3. During the production process, it is necessary to ensure that all protective covers are installed in good condition. If the paper is stuck on the embossing roller or wool roller, the automatic embossing napkin will be damaged, and the wool roller may be damaged, so it should be cleaned up in time;

4. If heating is used for setting, the heating power should be turned off one hour before shutdown, otherwise the wool roller will be damaged. We must pay attention to these matters. If we ignore these problems, when things really happen, we will have caused losses, so we must strictly follow the installation and operation process.


分享到:

手机:13961710707                               电话:0510-83386681                               邮箱:wxjinbao@163.com                               QQ:1318851796

传真:0510-83291580                           网址:http://www.wxjinbao.com               地址:无锡市前洲镇工业园新石路8-1号

扫一扫关注微信公众号
Mobile Phone:13961710707                Telephone:0510-83386681                    E-mail:wxjinbao@163.com                           QQ:1318851796
Fax:0510-83291580                             Website:http://www.wxjinbao.com        Address:8-1 Xinshi Road, industrial park, Qianzhou Town, Wuxi City