Now people are very familiar with the printed clothes, especially the T-shirts with personalized printing patterns in summer, especially popular among young people. Moreover, due to the low manufacturing cost and variety of these T-shirts, many young entrepreneurs have been attracted. And these T-shirts with personalized printing patterns not only condense the creativity of those designers, but also are indispensable equipment to complete the products.
Have to learn knowledge clothing printing machine maintenance methods
At present, our common clothing printing machines include the following types, screen printing machine, cold transfer printing machine, heat transfer printing machine, hot stamping machine. As the garment printing machine belongs to the category of special machine, which meets the requirements of garment enterprises for small batch and multi variety of special machines, there may be dozens to hundreds of varieties and specifications of clothing printing machines, and the classification angle is also different. According to the driving mode of printing, it can be classified into pneumatic, hydraulic and computer. According to the printing method, there are roller printing machine and plate printing machine. In recent years, some enterprises have developed and put into production the cold transfer printing machine. Now, the printing machine can be generally divided into heat transfer printing machine and cold transfer printing machine. The big difference is that the former needs and needs heating when printing, while the latter has no temperature at all. Cold transfer printing machine, generally speaking, is "cold".
The maintenance of clothing printing machine is also a part that has to be learned. The following content of small series will be clothing printing machine maintenance methods listed to you. I hope you can learn how to maintain the suitable clothing printing machine.
The main maintenance instructions of clothing printing machine are as follows:
1： The bottom wheel of printing machine, when cleaning the table glue of the table top, avoid the table glue sticking to the bottom wheel. After cleaning, check whether there is adhesive on the bottom wheel. If there is, wipe it with dry cloth, otherwise the printing accuracy will be directly affected;
2： The air source processor on the garment printing machine should be turned off twice a day for drainage; the aerosol oil should be adjusted to 4-5 drops per minute, and the air should be turned off when refueling;
3： In the process of use, the emergency stop switch on the printing machine should be used as little as possible to avoid the influence of emergency stop on the life of chain, drag chain and synchronous belt;
4： Smooth axis (machine movement part), butter twice a week;
5： Joint head, can drop butter (once a week, 10-20g), oil (1-2 drops, 3 days / time).