不得不学习的知识 服装印花机的保养方法

现在人们对于印花服装是非常熟悉了，特别是夏天带有个性化印花图案的T恤衫，尤其受注年轻人的喜爱。而且由于这类T恤衫的制造成本低，花样多，吸引了不少年轻创业人。而这些带有个性化印花图案的T恤衫的除了凝结了那些设计师的创意之外，服装印花机也是完成产品不可或缺的设备。

不得不学习的知识服装印花机的保养方法

当下我们常见的服装印花机包括以下几种，丝网印花机，冷转印印花机，热转移印花机，烫画机。由于服装印花机属于特种机的范畴，满足服装企业对特种机小批量、多品种的要求，所以服装印花机的品种、规格可能有几十到上百种，分类的角度也有所不同。按印花的驱动方式分，可以有气动、液压和电脑这几个分类。按印花方式分，有滚筒式印花机和平板式印花机。近几年有企业研发投产了冷转印印花机，如今或可以直接将印花机泛泛分为热转印印花机和冷转印印花机，而其中较大的区别就是，前者印花时是需要而且需要进行加温的，后者工作时是完全没有温度的。冷转印印花机，通俗来讲，就是“冷”的。

服装印花机的保养也是一门不得不学习的部分。下面的内容小编就将服装印花机的保养方法罗列给大家。希望大家在购买到适合的服装印花机外，还可以学会如何保养它。

服装印花机主要保养说明如下：

一：印花机底轮，在清洗台面的台胶时，避免台胶粘到底轮，在清洗完后，要检查底轮是否有粘台胶，如有可用干抹布涂天那擦试，否则直接影响对印花的精度；

二：服装印花机上的气源处理器，每天需关气排水2次；气雾油，调节至每分钟4-5滴，并在加油时要关气；

三：急停开关，在使用过程中，对于印花机上急停开关要尽量少用，避免急停影响链条，拖链，同步带的寿命；

四：光轴(机器运动部分)，每星期上2次黄油；

五：关节头，可滴黄油(一星期/次，10-20g)，机油(1-2滴，3天/次)。

Now people are very familiar with the printed clothes, especially the T-shirts with personalized printing patterns in summer, especially popular among young people. Moreover, due to the low manufacturing cost and variety of these T-shirts, many young entrepreneurs have been attracted. And these T-shirts with personalized printing patterns not only condense the creativity of those designers, but also are indispensable equipment to complete the products.

Have to learn knowledge clothing printing machine maintenance methods

At present, our common clothing printing machines include the following types, screen printing machine, cold transfer printing machine, heat transfer printing machine, hot stamping machine. As the garment printing machine belongs to the category of special machine, which meets the requirements of garment enterprises for small batch and multi variety of special machines, there may be dozens to hundreds of varieties and specifications of clothing printing machines, and the classification angle is also different. According to the driving mode of printing, it can be classified into pneumatic, hydraulic and computer. According to the printing method, there are roller printing machine and plate printing machine. In recent years, some enterprises have developed and put into production the cold transfer printing machine. Now, the printing machine can be generally divided into heat transfer printing machine and cold transfer printing machine. The big difference is that the former needs and needs heating when printing, while the latter has no temperature at all. Cold transfer printing machine, generally speaking, is "cold".

The maintenance of clothing printing machine is also a part that has to be learned. The following content of small series will be clothing printing machine maintenance methods listed to you. I hope you can learn how to maintain the suitable clothing printing machine.

The main maintenance instructions of clothing printing machine are as follows:

1： The bottom wheel of printing machine, when cleaning the table glue of the table top, avoid the table glue sticking to the bottom wheel. After cleaning, check whether there is adhesive on the bottom wheel. If there is, wipe it with dry cloth, otherwise the printing accuracy will be directly affected;

2： The air source processor on the garment printing machine should be turned off twice a day for drainage; the aerosol oil should be adjusted to 4-5 drops per minute, and the air should be turned off when refueling;

3： In the process of use, the emergency stop switch on the printing machine should be used as little as possible to avoid the influence of emergency stop on the life of chain, drag chain and synchronous belt;

4： Smooth axis (machine movement part), butter twice a week;

5： Joint head, can drop butter (once a week, 10-20g), oil (1-2 drops, 3 days / time).